Commercial Plumbing Plugs

Bypass versions for testing residential & commercial plumbing systems in buildings where a smaller shorter plug is needed.

For pipes from 2" - 12" in diameter.

Equipped with female bypass which can be converted to an air testing plug by adding the adapter (shown right)

Plugs for commercial plumbing

Made of special SBR rubber, these plugs are ideal for testing of plumbing systems in residential and commercial buildings. Available in multi size versions for pipe sizes from 2" to 8" in diameter. Due to high quality materials and workmanship, all SAVA plugs have a minimum safety factor of 3, ensuring a high level of reliability and safety. Plugs are equipped with a standard TR-15 (bike tire) valve.

Accessories for Sava Commercial Plumbing Plugs:

Air test adapters:
For plugs with female bypass sizes: 1", 2", 4"

2ft - 3ft - 6.5ft - 16.5ft - 32 ft

Sizes & Specifications:

Single size pipe plugs, no bypass (100 Series)

Single size pipe plugs, with bypass (200 series)

Accessories for Plug It Products Commercial Plumbing Plugs:

Inflation rope hose with gauge. Sizes: 20, 30, 40ft. Custom sizes.

Telescoping Pole, 8-20 feet for above ground, remote placement of plugs.

Sizes & Specifications:

Cherne Plumbing Test Ball® Plugs

Cherne Plumbing Test Ball® Plugs were first introduced in 1953 as a more versatile product than traditional mechanical plugs. Designed to test drain, vent and waste systems Cherne Test Ball® Plugs could be used in any type of pipe, could be inserted through a test tee, and sealed out of round pipe as well. Cherne introduced the multi-size yellow-top Test Ball® plugs in 2002. These test ball plugs have the same great features found in the original test ball plugs, but can be used in more than one pipe size.

Accessories for Cherne Plumbing Test Balls:

Test Pump: Wood handle, forged steel for toughness. 60 psi gauge & 3' hose.

Poly Lift Line: Great for plugs up to 16". Sizes: 10, 20, 30, 40ft lengths

Specs for plugs up to 6"

Specs for plugs up to 16"

Sizes & Specifications

Cherne® Single & Multi-Size Muni-Ball® Plugs

The Muni-Ball® Plug was introduced over 50 years ago and the Cherne brand continues to be the most trusted name in pneumatic plugs today. Muni-Ball® Plugs offer a full bypass allowing both testing and monitoring of piping systems.

Muni-Balls® are ideal for installation and repair of residential or commercial piping systems. Cherne Muni-Ball® products can also be used for maintenance of municipal infrastructure, including sanitary and storm sewer pipe systems. Muni-Ball® plugs are durable, rugged and are effective on almost any type of pipe.

Accessories for Cherne Muni-Balls:

Test Pump: Wood handle, forged steel for toughness. 60 psi gauge & 3' hose.

Poly Lift Line: Great for plugs up to 16". Sizes: 10, 20, 30, 40ft lengths

Air Test Converter: Convert plugs 4" & up, w/ at least 3/4" byp.

Sizes & Specifications

Cherne® Long Test-Ball® Plugs

Cherne's Long Test-Ball® plugs are designed for waste stack testing-sealing the rise and the run to perform the test. These long ball plugs can also be used to seal the wye to conduct sewer air tests. Molded-in sealing ribs at each end of the plug ensure a leak-free seal.

Long Test-Ball® Plug ("The Original") Features:

MS2® Long Test-Ball® Plug Features: